|
× |
 |
ISO 887:2000, Plain washers for metric bolts, screws and nuts for general purposes — General plan |
$81.00 |
|
$162.00 |
|
× |
 |
Hole Size Is Critical To Tapping Screws Performance – (IFI-TB_C_011) |
$20.00 |
|
$20.00 |
|
× |
|
ISO 888:2012, Fasteners – Bolts, screws and studs – Nominal lengths and thread lengths |
$54.00 |
|
$54.00 |
|
× |
|
Fundamentals of Hydrogen Embrittlement in Steel Fasteners_Brahimi 2014 – (IFI-TB_E_019) |
$20.00 |
|
$20.00 |
|
× |
|
ASTM A193 B7, A194, 2H, and Other Bolting Standards Now Require Decarburization Inspection – (IFI-TB_F_028) |
$20.00 |
|
$40.00 |
|
× |
|
ISO 965-2:1998/Amd1:2021, – Amendment 1 |
$23.00 |
|
$23.00 |
|
× |
|
ISO 68-1:2023, ISO general purpose screw threads — Basic and design profiles — Part 1: Metric screw threads |
$54.00 |
|
$54.00 |
|
× |
|
Bolt strength PSI vs pounds – (IFI-TB_C_009) |
$20.00 |
|
$40.00 |
|
× |
|
ISO 14586:2011, Hexalobular socket countersunk head tapping screws |
$54.00 |
|
$54.00 |
|
× |
|
ISO 15330:1999, Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method |
$81.00 |
|
$81.00 |
|
× |
 |
Alloy and Composition Dependence of Hydrogen Embrittlement Susceptibility in High Strength Steel Fasteners (hard bound book) |
$150.00 |
|
$150.00 |
|
× |
|
ISO 965-4:2021, ISO general purpose metric screw threads – Tolerances – Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
$54.00 |
|
$54.00 |
|
× |
|
ISO 14588:2000, Blind rivets — Terminology and definitions |
$124.00 |
|
$124.00 |
|
× |
|
ISO 10642:2019, Fasteners – Hexagon socket countersunk head screws with reduced loadability |
$81.00 |
|
$81.00 |
|
× |
|
Hydrogen Embrittlement Testing – (IFI-TB_E_023) |
$20.00 |
|
$40.00 |
|
× |
|
ISO 263:1973, ISO inch screw threads – General plan and selection for screws, bolts and nuts – Diameter range 0.06 to 6 in |
$54.00 |
|
$54.00 |
|
× |
|
10 Questions about Fastener Quality Act (FQA) – (IFI-TB_D_017) |
$20.00 |
|
$20.00 |
|
× |
|
ISO 898-5:2012, Mechanical properties of fasteners made of carbon steel and alloy steel – Part 5: Set screws and similar threaded fasteners with specified hardness classes – Coarse thread and fine pitch thread |
$124.00 |
|
$124.00 |
|
× |
|
The applicable operating temperature ranges for various fastener standards – (IFI-TB_C_016) |
$20.00 |
|
$20.00 |
|
× |
|
ISO 10673:2009, Plain washers for screw and washer assemblies – Small, normal and large series – Product grade A |
$81.00 |
|
$81.00 |
|
× |
|
Catch Defective Tapping Screws Before Your Customers Do – (IFI-TB_F_030) |
$20.00 |
|
$20.00 |
|
× |
|
ISO 14584:2011, Hexalobular socket raised countersunk head screws |
$54.00 |
|
$54.00 |
|
|
