×
Proper Ring Gage Setting Procedures Are – (IFI-TB_N_095)
$ 20.00
Quantity
Proper Ring Gage Setting Procedures Are – (IFI-TB_N_095) quantity
$ 20.00
×
ISO 898-7:1992, Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
$ 54.00
Quantity
ISO 898-7:1992, Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm quantity
$ 54.00
×
Only the GO Size Is Different After Plating on External Inch Threads – (IFI-TB_M_079)
$ 20.00
Quantity
Only the GO Size Is Different After Plating on External Inch Threads – (IFI-TB_M_079) quantity
$ 20.00
×
ISO 965-1:2013, ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data
$ 166.00
Quantity
ISO 965-1:2013, ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data quantity
$ 332.00
×
Zinc-Nickel Alloy Plating Provides a Practical Alternative to Zinc Plating – (IFI-TB_A_006)
$ 20.00
Quantity
Zinc-Nickel Alloy Plating Provides a Practical Alternative to Zinc Plating – (IFI-TB_A_006) quantity
$ 20.00
×
Gage Calibration Cycles Can Be Based on the Time or Use – (IFI-TB_N_083)
$ 20.00
Quantity
Gage Calibration Cycles Can Be Based on the Time or Use – (IFI-TB_N_083) quantity
$ 20.00
×
6e and 6E Pitch Diameter Allowances Provide Space for Heavy Coatings – (IFI-TB_M_074)
$ 20.00
Quantity
6e and 6E Pitch Diameter Allowances Provide Space for Heavy Coatings – (IFI-TB_M_074) quantity
$ 20.00
×
Bolt strength PSI vs pounds – (IFI-TB_C_009)
$ 20.00
Quantity
Bolt strength PSI vs pounds – (IFI-TB_C_009) quantity
$ 20.00
×
ISO 263:1973, ISO inch screw threads – General plan and selection for screws, bolts and nuts – Diameter range 0.06 to 6 in
$ 54.00
Quantity
ISO 263:1973, ISO inch screw threads – General plan and selection for screws, bolts and nuts – Diameter range 0.06 to 6 in quantity
$ 54.00
×
ISO 898-1:2013, Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread
$ 250.00
Quantity
ISO 898-1:2013, Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread quantity
$ 250.00
Coupon: Apply coupon
Update cart